How Technology Will Transform the Construction Industry in 2027

Construction has a reputation for being slow to change, and for good reason. When a building goes up, the stakes are high and mistakes are expensive, so the industry tends to trust methods that have already been proven. That caution is starting to give way. A persistent labor shortage, tighter codes, and pressure to deliver projects faster have pushed contractors to adopt technology at a pace that would have seemed unlikely a few years ago.
For facility managers and building owners on Long Island, these changes matter long after the ribbon cutting. The way a building is designed, built, and documented determines how easy it is to operate and maintain for the next 30 to 50 years. Here are the construction technology trends to watch in 2027, and what they mean for the people who will run the buildings.
Modular and Prefabricated Construction Moves Into the Mainstream
Modular construction was long treated as a niche option for temporary classrooms and job trailers. That perception has shifted. The AC Hotel NoMad in Manhattan, a 26-story, 358-foot tower built largely from factory-made guest room modules, was completed in 2022 and showed that volumetric modular can work at real scale in a dense market.
The market continues to grow. MarketsandMarkets projects the global modular construction market will grow from about $109.6 billion in 2025 to roughly $142.9 billion by 2030, driven by labor shortages, housing affordability pressures, and demand for lower-waste building methods. The firm also notes that because factory fabrication can run alongside site preparation, project timelines can shrink by 30 to 50 percent.
On Long Island, where construction labor is expensive and building seasons are shaped by weather, prefabrication is showing up in more modest but practical ways: prefabricated bathroom pods, mechanical skids, wall panels, and pre-assembled electrical rooms. For facility managers, the key questions are about long-term serviceability. Ask how modules connect, where shutoffs and access panels are located, and who holds warranty responsibility when factory-built components and site-built systems meet.
BIM, COBie, and Digital Twins Close the Handover Gap
Building Information Modeling has become standard practice on most commercial projects of any size. Design teams and contractors use 3D models to coordinate trades, detect clashes before they become field problems, and plan construction sequences. The weak point has always been handover. Too often, the model is archived after construction and the facilities team starts from scratch with a clipboard and a stack of PDFs.
That gap is finally getting attention. As AutomatedBuildings.com explains, COBie (Construction Operations Building Information Exchange) defines which information from the model should go to the operations team, including equipment names, types, locations, warranties, spare parts, and maintenance schedules. The IFC 4.3 open data standard, approved as an ISO standard in January 2024, now covers building services and the mechanical and electrical systems that building automation teams operate.
The article's recommendations for owners are worth adopting on any capital project. Require equipment naming that matches the building automation system, require manufacturer data, model numbers, and installation dates in COBie format before substantial completion, and write the handover deliverable into the contract as a firm requirement rather than a courtesy. Clean handover data is also the foundation for a digital twin, a live model connected to sensors and maintenance systems that lets facility teams see equipment conditions in context.
Jobsite Robotics Move From Novelty to Routine
Robots on construction sites used to be demonstrations at trade shows. In 2026, they became common. The BuiltWorlds 2026 Annual Equipment and Robotics Benchmarking Report found that 79 percent of contractors used jobsite robotics to some degree in 2026, up from 29 percent in 2025. Contractors cited accuracy, reduced manual effort, and safety as the main reasons. Boston Dynamics was the most adopted vendor, and Dusty Robotics, which makes layout robots that print floor plans directly onto concrete slabs, was the most piloted.
The same report found that 32 percent of contractors were still in the pilot or trial stage, so many deployments remain experimental. The most mature uses are layout, drilling, material transport, and site monitoring, where robots like Boston Dynamics' Spot walk a site and capture progress photos and laser scans.
For facility managers, reality capture is the most immediately useful application. Laser scans and 360-degree imagery captured during construction create accurate as-built records of what is behind walls and above ceilings. Ask your contractor whether these scans will be delivered at closeout. They are far more reliable than redlined drawings when you need to plan a renovation or trace a pipe five years later.
AI Takes Hold in Estimating, Scheduling, and Project Controls
Artificial intelligence is moving quickly from talk to practice in construction offices. According to the ServiceTitan 2026 Commercial Specialty Contractor Industry Report, 38 percent of commercial contractors now report measurable business impact from AI, up from 17 percent in 2025. The most common uses are cost estimation and budgeting, followed by bid management.
The same report found that only 20 percent of contractors run on a single software platform, which limits how far AI can reach across a project. For owners, this means AI-assisted estimates and schedules are increasingly common, but the quality of the output still depends on the quality of the data behind it. Treat AI-generated estimates as a strong starting point, not a final number, and ask contractors how their tools were validated on comparable projects.
3D Printing Has Deep Roots on Long Island
Long Island has a direct connection to construction-scale 3D printing. In 2021, Patchogue-based SQ4D listed what News 12 called the nation's first 3D-printed house for sale, a home in the Town of Riverhead with concrete walls extruded by a large robotic printer.
Since then, 3D printing in construction has developed along two tracks. Printed concrete structures remain most common in single-family and small residential projects. In commercial work, printing is more often used for custom components, formwork, architectural elements, and replacement parts. For facility managers, the practical opportunity is the second track. Printing hard-to-find parts for legacy equipment, such as brackets, knobs, housings, and covers, can keep older systems running while a replacement is planned.
Wearables and Exoskeletons Target Injury Prevention
Construction remains one of the most physically demanding industries, and wearable technology is aimed squarely at reducing injuries. Smart hard hats, fatigue monitors, proximity sensors, and gas detectors alert workers to hazards in real time. Exoskeletons support the shoulders and back during overhead work and heavy lifting.
The evidence is still developing. A National Safety Council-funded field study by Wichita State University had workers in drywall, pipefitting, sheet metal, and electrical trades wear an exoskeleton for up to three weeks. Workers found it comfortable and most helpful for overhead tasks, but objective measures showed no statistically significant changes in body part discomfort, shoulder strength, or joint mobility.
The takeaway for facility managers is to treat wearables as one part of a safety program rather than a solution on their own. For in-house maintenance teams that do a lot of overhead work, such as ceiling tile replacement, light fixture work, and ductwork access, a short trial is a reasonable, low-cost way to see whether the equipment fits your tasks.
New York's 2025 Building Code Raises the Bar for Long Island Projects
Technology is not the only thing changing how buildings go up. The 2025 New York State Uniform Code and Energy Code took effect on December 31, 2025, and any project permitted in 2027 will be designed under these rules. The update adopted nine of the 2024 International Codes with state amendments. According to the International Code Council, the changes include automatic sprinklers in all new townhomes on municipal water systems and stronger protection requirements for battery and energy storage systems.
The flood provisions are especially significant for Long Island's coastal communities. As the Association of State Floodplain Managers summarizes, flood-resistant construction requirements now extend to the 500-year floodplain, and the required flood elevation is the base flood elevation plus two feet of freeboard, with an additional 18 inches in tidal areas to account for sea level rise. These rules apply statewide outside New York City.
The code's provisions barring fossil fuel equipment in new buildings have been the subject of litigation. As of the Department of State's July 2026 update, those provisions were suspended by court order. Confirm their current status with your local building department before finalizing mechanical designs.
The Construction Labor Shortage Drives Technology Adoption
Behind nearly every trend in this article is a shortage of skilled workers. Associated Builders and Contractors estimates the industry needs about 349,000 net new workers in 2026, rising to about 456,000 in 2027 as construction activity rebounds. ABC's chief economist points to an aging workforce and elevated retirement rates as major drivers.
On Long Island, high living costs make it harder to recruit and keep younger tradespeople, which puts upward pressure on labor costs and project schedules. That is exactly why modular construction, robotics, and AI are gaining ground. They let fewer workers accomplish more. For owners, it means building realistic schedules, locking in contractors early, and expecting labor costs to remain a significant share of project budgets.
What Facility Managers Should Ask For on Their Next Capital Project
Facility managers have more influence over new construction and renovation projects than they often realize, especially if they get involved early. On your next capital project, push for these requirements in the contract documents:
- A COBie-formatted equipment data deliverable, due before substantial completion
- Equipment naming conventions that match your building automation system and CMMS
- Laser scans or 360-degree reality capture of above-ceiling and in-wall conditions before close-in
- Clear access, shutoff, and warranty documentation for prefabricated and modular components
- Confirmation that the design meets the 2025 flood elevation requirements if the site is in a flood hazard area
- Training sessions for your maintenance team before the contractor demobilizes
The technology reshaping construction is ultimately about building faster, safer, and smarter. The facility teams who benefit most will be the ones who make sure that the data, documentation, and design decisions from construction carry forward into decades of efficient operation.
If you're an IFMA-LI member, please log in so you can comment on this article.


